Intramolecular 1,3‐Dipolar Cycloaddition‐Mediated Stereoselective Synthesis of Disubstituted Cyclopentane: A Simple Model for the Cyclopentane Ring System of Polycyclic Oroidine Alkaloids

We present a diastereoselective synthesis of disubstituted cyclopentane 8 having a nitrogen‐containing quaternary carbon center, which is found in axinellamine A ( 5 ) and related compounds. During this work, we found that the 1,3‐dipolar cycloaddition product 24 immediately underwent intramolecular redox reaction at the newly formed morpholin‐2‐one moiety, thus affording disubstituted cyclopentane containing a tertiary amine ( 9 ) stereoselectively in good yield. The amine 9 was successfully converted into guanidine 31 , which corresponds to 8 , through iminium cation–enamine isomerization.     

Officinatrione: an unusual (17S)-17,18-seco-lupane skeleton,and four novel lupane-type triterpenoids from the roots of Taraxacum officinale

Novel 5 lupane-type of triterpenois, i.e., 3β-acetoxy-18α,19α-epoxylupan-21β-ol (1), 18α,19α-epoxy-21β-hydroxylupan-3-one (2), lup-18-ene-3,21-dione (3), lupa-18,21-dien-3β-yl acetate (4), and (17S)-17,18-seco-lup-19(21)-ene-3,18,22-trione (5), named officinatrione, as well as 16 known compounds from the roots of Taraxacum officinale collected in Takatsuki city, Osaka, Japan. Of the above compounds, 5 was the first lupane-type triterpene, of which the D-ring was open to form a nine-membered ring. Compounds 2 and 5 exhibited moderate cytotoxic activities against L1210 cell line (IC₅₀ 10.5 and 10.1 μM).     

Universal fluorescent labeling of amplification products using locked nucleic acids

Amplification/hybridization‐based genetic analyses using primers containing locked nucleic acids (LNAs) present many benefits. Here, we developed a novel design for universal fluorescent PCR using LNAs. Universal fluorescent PCR generates intermediate nonlabeled fragments and final fluorescent fragments in a two‐step amplification process that uses locus‐specific primers with universal tails and universal fluorescent primers. In this study, a few standard nucleotides were replaced with LNAs only in the fluorescent universal primers. The sequence of the fluorescent universal primer significantly affected the amplification efficiency. For primers with three LNAs, the fluorescent primers with stable M13(‐47) sequences provided the most efficient signal (approximately tenfold higher than the primers with M13(‐21) sequences at lower Tm values). Moreover, AT‐rich LNA substitutions in the fluorescent primers produced much lower amplification efficiencies than GC‐rich substitutions. GC‐rich LNAs produced greater differences in Tm values among primers, and resulted in the preferential production of fluorescently labeled amplicons. The specificity and sensitivity of LNA‐containing fluorescent primers were assessed by genotyping eight STRs in Japanese individuals, and full STR profiles could be generated using as little as 0.25 ng of genomic DNA. The method permitted clear discrimination of alleles and represents sensitive STR genotyping at a reduced cost.     

Asymmetric α‐Hydroxylation of Tetralone‐Derived β‐Ketoesters by Using a Guanidine–Urea Bifunctional Organocatalyst in the Presence of Cumene Hydroperoxide

Highly enantioselective catalytic oxidation of 1‐tetralone‐derived β‐keto esters was achieved by using a guanidine–urea bifunctional organocatalyst in the presence of cumene hydroperoxide (CHP), a safe, commercially available oxidant. The α‐hydroxylation products were obtained in 99 % yield with up to 95 % enantiomeric excess (ee). The present oxidation was successfully applied to synthesize a key intermediate of the anti‐cancer agent daunorubicin ( 2 ).     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Dispersion of Carbon Nanotubes with “Green” Detergents

Solubilization of carbon nanotubes (CNTs) is a fundamental technique for the use of CNTs and their conjugates as nanodevices and nanobiodevices. In this work, we demonstrate the preparation of CNT suspensions with “green” detergents made from coconuts and bamboo as fundamental research in CNT nanotechnology. Single-walled CNTs (SWNTs) with a few carboxylic acid groups (3–5%) and pristine multi-walled CNTs (MWNTs) were mixed in each detergent solution and sonicated with a bath-type sonicator. The prepared suspensions were characterized using absorbance spectroscopy, scanning electron microscopy, and Raman spectroscopy. Among the eight combinations of CNTs and detergents (two types of CNTs and four detergents, including sodium dodecyl sulfate (SDS) as the standard), SWNTs/MWNTs were well dispersed in all combinations except the combination of the MWNTs and the bamboo detergent. The stability of the suspensions prepared with coconut detergents was better than that prepared with SDS. Because the efficiency of the bamboo detergents against the MWNTs differed significantly from that against the SWNTs, the natural detergent might be useful for separating CNTs. Our results revealed that the use of the “green” detergents had the advantage of dispersing CNTs as well as SDS.     

Helical Carbon and Graphite Films Prepared from Helical Poly(3,4‐ethylenedioxythiophene) Films Synthesized by Electrochemical Polymerization in Chiral Nematic Liquid Crystals

Helical carbon and graphite films from helical poly(3,4‐ethylenedioxythiophene) (H‐PEDOT) films synthesized through electrochemical polymerization in a chiral nematic liquid‐crystal (N*‐LC) field are prepared. The microscope investigations showed that the H‐PEDOT film synthesized in the N*‐LC has large domains of one‐handed spiral morphology consisting of fibril bundles. The H‐PEDOT films exhibited distinct Cotton effects in circular dichroism spectra. The highly twisted N*‐LC with a helical pitch of smaller than 1 μm produced the H‐PEDOT film with a highly ordered morphology. The spiral morphologies with left‐ and right‐handed screws were observed for the carbon films prepared from the H‐PEDOT films at 800 °C and were well correlated with the textures and helical pitches of the N*‐LCs. The spiral morphologies of the precursors were also retained even in the graphite films prepared from the helical carbon films at 2600 °C.